Our products:
Articles
FAQ
Efficiency:
92,9%
Output:
81kW
Hopper:
On the side
SMARTFIRE 81
5-year guarantee
High-quality materials and modern technologies used in production allow us to extend the warranty on the tightness of the boiler up to 5 years.
EcoDesign
EcoDesign 2020 Directive laid down restrictive requirements regarding emission and efficiency what is reflected in boiler actual use during the heating season.
5 Class
All boilers have been tested by an independent institute with EU notification to ensure reliable results that are recognized all over the world.
Lambda probe
Smart logarithm controls boiler operation according to current ambient conditions, and ensures the highest possible efficiency. It guarantees maximum reduction of emission and soot deposits.
Mechanical burner cleaning
The grate driven by the actuator ensures automatic cleaning of burner before firing up and after shut down what ensures high comfort during boiler operation, as well as high efficiency and conformity with environmental requirements.
Touch screen
Thanks to user-friendly controller that in standard version drives operation of 2 heating circuits (extension is possible up to 4 circuits optionally), buffer, temperature thermostat, lambda probe (optionally).
Stainless steel
High quality materials used for burner manufacture ensure long-time performance, whereas specially designed construction ensures optimal pellet combustion.
Automatic cleaning
Burner and exchanger automatic cleaning ensures comfort and high efficiency during operation.
Rotary valve
Rotary valve that protects the fuel in the pellet tank against fire.
Energy savings
Energy-efficient components that reduce energy consumption and save your money.
An advanced controller
User-friendly touch screen, provision of hot domestic water in standard and possible extension with: 4 circuits, buffer, temperature thermostat, lambda probe.
Internet
(Optionally)
See the relevant data table
An advanced ecoNET300 communication module ensures remote boiler operation, servicing, overview of parameters history, as well as sending e-mail messages and alarms.
Automatic ash removal
(Optionally)
See the relevant data table
Automatic ash removal system ensures ash collection inside the container where compressing follows. Therefore the user removes the ash no sooner that after some months.
Technical support and service
A+
SMARTFIRE 81
The SmartFire pellet boiler features a compact design. Most of the boiler components are located inside the casing, which protects them from harmful external factors and mechanical damage. Inside the SmartFire boiler casing, two main elements can be distinguished: the boiler body and the fuel feeding system.
The boiler body consists of the collector, steel heat exchanger, combustion chamber, and ash chamber. Inside the steel heat exchanger, there are vertical flue gas tubes and a deflector. The heat exchanger is equipped with a manual cleaning system. The heat exchanger is mounted on the lower part of the boiler body, which includes the combustion chamber, ash chamber, and flue gas collector. Inside the combustion chamber, there is a burner. The burner is equipped with an automatic cleaning system. Fuel is supplied to the burner from the top via a gravity-fed screw feeder. Directly below the combustion chamber is the ash chamber, where the ash from the burner falls into the ash pan.
The second main element of the SmartFire pellet boiler is the fuel feeding system. It is an integral part of the boiler’s outer casing. It consists of the fuel hopper and a screw feeder with a gear motor. The fuel falls from the reserve hopper into the screw feeder, which then transports the fuel to the burner in the combustion chamber. The boiler body with the fuel feeding system is connected by the screw feeder flange. Two hinged covers are located on the front wall of the SmartFire boiler. Under the left cover, there are inspection doors that allow access to the combustion chamber and ash chamber. Under the right cover, there is an inspection opening for the lower part of the fuel feeding system and the boiler controller. Above the right cover, on the front wall, there is a display that shows the current status of the boiler, operating parameters, and allows configuration of the boiler.
The inlet and outlet for heating water, used to connect the boiler to the central heating system, are located on the rear wall of the boiler. They are equipped with internal-threaded connections G 1¼”. On the rear wall of the boiler, next to the flue gas outlet, is the exhaust fan. Above the flue gas outlet is a flue gas temperature sensor. The amount of air pumped by the fan is controlled and set by the controller.
The outer casing and the boiler body are insulated with mineral wool, which prevents heat loss during operation. The boiler casing is made of steel plates coated with high-quality, durable powder paint.
The modern controller manages the operation of the boiler and the entire boiler room, including pumps, valves, actuators, and the boiler. This ensures that all devices are integrated, and the controller optimally adjusts their operating parameters.
Pneumatic transport of pellets from a larger hopper. This solution is available as an option.
SMARTFIRE 81
Power: 81 kW
Material:
Steel
Feeder:
Screw, protective sluice
Burner:
Drop-in burner, automatic ignition, automatic cleaning
Controller:
Modulated power, weather control, 2 heating circuits (+2 circuits optional), 1 domestic hot water circuit, Lambda sensor, WiFi Internet (optional), Room control panel (optional)
Heat exchanger cleaning:
Automatic
Fuel:
Pellets
Efficiency:
92.9%
Hydraulic set:
Set with energy-efficient pump and thermostatic valve
Hopper capacity:
330
liters
Fuel transport:
Screw feeder, protective sluice; optional: additional VACUM feeder or screw feeder from a larger hopper
SMARTFIRE 81
Thermal and Technical Parameters SF81
| Model | SF81 / 330L | |
|---|---|---|
| Nominal Power: | kW | 81 |
| Thermal Power Range: | kW | 24.3 ÷ 81.0 |
| Efficiency: Pellet granules Q=18 MJ/kg |
% | 92.9 |
Dimensions SF81
| Model | SF81 / 330L | |
|---|---|---|
| Height - Y: | mm | 1980 |
| Width - X: | mm | 1300 |
| Depth - Z: | mm | 1560 |
SMARTFIRE 81
SMARTFIRE 81
Modern heating devices
Articles
FAQ
