Steel pellet storage silo SUPERSILO STEEL CONSTRUCTION

Most reliable storage silo available on the market!

Volume:

4 - 10,1 m3

Volume::

2,6 - 6,6 t

SUPERSILO STEEL CONSTRUCTION

Features

SUPERSILO STEEL CONSTRUCTION

Installation in 30min.!

Installation in 30min.!

An Allen key required for installation only

An Allen key required for installation only

Includes a supply pipe

Includes a supply pipe

Possible installation at some distance from the boiler

Possible installation at some distance from the boiler

Simple and quick installation

Simple and quick installation

Ready for operation

Ready for operation

Stress-resistant

Stress-resistant

Dust-free operation

Dust-free operation

Volume controlled from outside

Volume controlled from outside

Easy disassembly

Easy disassembly

Easy to carry

Easy to carry

Many sizes and volumes available

Many sizes and volumes available


Description

SUPERSILO STEEL CONSTRUCTION

Compatible with various loading systems

PNEUMATIC FILLING

Silo is provided with connection for hose installed on truck to allow pneumatic filling.
Thanks to specially designed fabric a single connection is sufficient. Max. operating pressure 0.8 bar.


MANUAL FILLING FROM BAGS

Also manual filling is possible with specially designed fixtures seated on the top cover or side wall. Optionally the silo may be provided with the lock installed to the top cover to allow filling from the top. Provided with lock that prevents dusting.


Characteristics

SUPERSILO STEEL CONSTRUCTION

Parameters

MODEL   SP200P SP250P SP300P
DESIGN   Steel structure Steel structure Steel structure
LENGTH (cm)   250 250 300
WIDTH (cm)   200 250 300
HEIGHT (cm)   180 - 230 180 - 230 180 - 230
CAPACITY (m3)   4 - 5,9 5,1 - 7,5 6,4 - 10,1
CAPACITY (t)   2,6 - 3,8 3,3 - 4,8 4,2 - 6,6


Pellet silos of steel (models: SP200P, SP250P, SP300P) and wooden (models: ECO170P and ECO200P) have a capacity that allows the storage of pellets in the amount of up to 6.6 tons This makes it possible to store more fuel which is powered by pellet stove .

Despite their large size, setting them up takes only 60 minutes and does not require prior preparation of the ground or installation of a concrete base. More importantly, specialized knowledge and skills are not needed. The constructions are also made of light materials, which enables them to be freely adjusted and folded.

Modern heating devices HKS Lazar

Modern heating devices

Articles

Automatic pellet fired stove

Comfort thanks to automatic pellet fired boiler.

Read
Pellet ON – Do you want to switch onto PELLETS?

Are you looking for comfortable and efficient solution? What is important? What you need to know?

Read

FAQ

How to check anti-freeze fluid level in Smart Fire 11 boiler with central heating function only (without hot domestic water supply). The boiler was not used this winter?

Any fluid loss will be demonstrated with pressure loss indicated by manometer. In case of open circuit, you can also check the level of compression vessel.

Read
Is 190oC temperature of flue gas in Lazar branded pellet fired boiler allowed?

This temperature is possible, if the heat exchanger gets dirty and boiler has been in operation for few hours at total output (at low outdoor temperature). In this case clean the boiler and check...

Read

Find:

Type in a word:

Choose your language:

Choose your language:

Polski Angielski Niemiecki Francuski Czeski

Contact us

Go to contact