Equipment FEEDER SCREW FEEDER

EL, EH type feeders supply bulk materials granulated 0.01 to 30mm e.g. cereal grain, pellets etc.
FEEDER SCREW FEEDER

Features

FEEDER SCREW FEEDER

Affordable price

Affordable price

Reliable with power reduced to 10W

Reliable with power reduced to 10W

Oil hardened coil

Oil hardened coil

Transparent chute

Transparent chute


Description

FEEDER SCREW FEEDER

Feeder operation is possible at any position up to 60 angle (optimal angle 45). Axleless coil made from carbon thermally hardened steel of 38mm or 53mm diameter. It is provided with PCV supply pipe of 75mm diameter, 4mm trick finished with opening taking the material. Handling stub pipe of 75mm or 63mm dia. allows connection to discharging pipe. Available length 1.6, 2, 2.5m.. Other lengths available upon request.


Characteristics

FEEDER SCREW FEEDER

Technical Data

Length: 1,6; 2,0; 2,5 m
Pipe dia.: 75mm
Stub pipe dia.: 75mm, (63mm upon request)
Coil dia.: 38 lub 53 mm
Coil pitch: 37 mm

Electrical Data

Supply voltage: 230 VAC

Drive:

Single phase induction engine with thermal protection, of 10 or 25W power, automatic transmission of 8 or 16 RPM.
IP Class: IP 40


Screw feeders

The EL and EH screw conveyors enable the transport of pellets with a granulation of 0.01 mm - 30 mm so that pellet stoves have constant access to fuel. The transport pipe is made of PVC, 75 mm in diameter, 4 mm thick, and is ended with a window collecting the transported material. It ensures tightness, but also has a low degree of abrasion, thanks to which the feeders can work for a long time without disturbances. This is especially important during the heating season when any heating system failures are troublesome.

The high quality of the feeders reduces the possible vibrations and shocks during the transport of loose substances, which reduces the generation of nuisance noise.

While augers work optimally when set at 45 degrees, they also perform efficiently at other slopes, from 60 degrees. This allows you to adjust the setting to the individual conditions in the boiler room.
The transport pipe consists of wormwheels (38 mm or 53 mm in diameter) with an inlet through which the pellet is taken, an outlet, gears and an electric motor. Worm wheels, i.e. non-axial spirals, are made of extremely durable carbon steel, additionally thermally hardened. As a result, they guarantee uninterrupted operation for many years.

Screw feeders are available in several variants with a length of 1.6 m, 2 m, 5.5 m. It is possible to order pipes and other components in non-standard dimensions on special order, as in the case of individual specifications at the time of purchase heat pumps, ventilation systems, stoves and pellet boilers, which are also in our offer.

Modern heating devices HKS Lazar

Modern heating devices

Articles

Pellet ON – Do you want to switch onto PELLETS?

Are you looking for comfortable and efficient solution? What is important? What you need to know?

Read
Class 5 and EkoDesign provides a new benchmark for central heating boilers

Unfortunately Poland has some of the worst air quality in Europe. The extent of the problem has been confirmed by World Health Organization Report based on data regarding the beginning of 2016. An astonishing 33 of Europe’s 50 most-polluted towns are in Poland and Polish town was ranked as the most polluted, what confirms how serious and huge is the problem.

Read

FAQ

Is room temperature sensor included in Eco max 800 t controller set?

Room temperature sensor is available upon separate order.

Read
Is 190oC temperature of flue gas in Lazar branded pellet fired boiler allowed?

This temperature is possible, if the heat exchanger gets dirty and boiler has been in operation for few hours at total output (at low outdoor temperature). In this case clean the boiler and check...

Read

Find:

Type in a word:

Choose your language:

Choose your language:

Polski Angielski Niemiecki Francuski Czeski

Contact us

Go to contact